27111.com新葡京-www.8466.com-澳门新葡京35222
27111.com新葡京
 

优化设想取有限元分析,高档构造力学仿真剖析及理论

科研成果

科研项目:
主持, "船体构造断裂强度剖析的间接计算法研讨", 国家自然科学基金面上项目, 2011年

主持, "冶金历程回响反映动力学研讨-铁水预处理工艺体系", 武汉钢铁(集团)公司, 2010年

主持, "可扩大的有限元分析通用软件平台手艺集成", 湖北省自然科学基金面上项目, 2010年

主持, "下韧性管线钢断裂特性的实行研讨取数值模仿", 武汉钢铁(集团)公司, 2009年
主持, "XXX橡胶体裂纹开裂对其力学性能的影响剖析", 横向, 2009年
主持, "船舶取陆地构造物掌握断裂构型设想的开端研讨", 教育部留学返国职员基金, 2008年

******* 以下为2007年之前的重要科研阅历*******
Research Fellow, "Computational and Experimental Schemes for Modeling Adhesive Bonded Structures", USCAR/DOE
Research Fellow, "Static and Dynamic Fracture of Carbon Fiber Reinforced Composites", USCAR/DOE
Research Assistant, "Development and Enhancement of Research Capability for Aircraft Structures and
Materials", NASA/EPSCoR
主持, "轿车用钢板冲压级别评定及科学运用", 武汉市"晨曦企图"青年学者赞助
主持, "武钢产汽车用钢板的冲压成型性评价取分类研讨", 武汉钢铁(集团)公司
主持, "大型钢结构焊接剩余应力消弭技术研究取运用", 武汉钢铁(集团)公司

学术专著:

02 解德, 钱勤, 李长安,著《断裂力学中的数值计算方法及工程运用》, ISBN: 978-7-03-025167-1, 科学出版社, 北京, 2009年 ( 2008年度"国家科学技术学术著作出书基金"赞助出书 )

01 刘再华, 解德, 王元汉, 李连常,《工程断裂动力学》, ISBN: 7-5609-1240-0, 华中理工大学出版社, 武汉, 1996年

学术论文(click the title to download the interested papers):

054 刘元丹, 熊治国, 刘敬喜, 解德, 基于AQWA的旁靠油轮火动力相互作用研讨, 舰船科学技术, 2012(34)5: 13-22.

053 曾巍, 付强, 解德, 爆炸消弭焊接剩余应力的数值模仿, 舰船科学技术, 2011(33)11: 7-12.
052 宋杨, 刘微, 程哲, 解德, 陆地平台T型管节点应力集中系数研讨, 船海工程, 2011(40)6: 121-124.
051 刘敬喜, 姜薇, 唐永生, 解德, 船舶典范构件裂纹扩大模仿及剖析, 华中科技大学学报(自然科学版), 2011(39)4: 110-113.
050 付强, 解德, 工程构造用钢屈强比剖析取讨论, 固体力学学报, 2011(32)S1: 314-317.
049 戴澍, 解德, 基于ABAQUS的小标准桩柱海浪力计算方法, 固体力学学报, 2011(32)S1: 288-295.
048 何文涛, 程哲, 张正艺, 解德, 单推试样裂纹扩大历程中的应力强度因子盘算, 固体力学学报, 2011(32)S1: 165-170.
047 令波, 程哲, 张正艺, 解德, 里内裂纹扩大题目的假造裂纹闭合法和离散内聚力模子, 固体力学学报, 2011(32)S1: 151-157.
046 宋杨, 程哲, 张正艺, 解德, 陆地平台X型管节点应力集中系数盘算, 固体力学学报, 2010(31)S1: 238-241.
045 程哲, 张正艺, 宋杨, 解德, 橡胶材料超弹性本构模子的简化标定要领, 固体力学学报, 2010(31)S1: 50-53.
044 张正艺, 解德, 曲面上线状裂纹的假造裂纹闭合法公式及其断裂单位, 固体力学学报, 2010(31)S1: 44-49.
043 唐正茂, 解德, 马士虎, 船舶观点设想阶段多学科和多目标优化研讨, 船舶力学, 2010(14)8: 879-886.
042 钱勤, 李长安, 解德, 李国清, 基于假造裂纹闭合法展望构造的委靡裂纹扩大寿命, 2009年天下压电和声波实际及器件技术研讨会暨2009年天下频次掌握手艺年会, 2009.

041 Xie D and Biggers, Jr. SB, Delamination growth and residual strength of compressively loaded sandwich panels with stiffness tailored face sheets, Journal of Sandwich Structures and Materials, 11(2009):133-150. SCI: 433PY
040 张正艺, 解德, 赵耀, 刘土光, 构造标准上三维线状裂纹扩大的数值模仿, 构造强度研讨, 2008(增刊):591-594, (第十四届天下委靡取断裂学术会议论文集, 10.20-22, 2008, 江西井冈山).
039 Xie D and Biggers, Jr. SB, Progressive damage arrest mechanism in tailored laminated plates with a cutout, Acta Mechanica Solida Sinica, 21(2008):62-72. SCI:336HO
038 Xie D, Garg M, Huang D, and Abdi, Cohesive zone model for surface cracks using finite element analysis, The 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, AIAA-2008-1764. Schaumburg, Illinois. April 7-10, 2008. EI: 082711352594
037 Abdi F, Xie D, Bhugaloo H, Le Bozec J, Progressive failure simulation of an aircraft fan blade impact onto engine inlet, Proceedings of COMP07: 6th International Symposium on Advanced Composites, COMP2007-009, Corfu, Greece, May 16-18, 2007.
036 Gotsis PK, Chamis CC, Kostantinos D, Xie D, and Abdi F, Progressive fracture of laminated fiber-reinforced composite stiffened plate under thermo-mechanical loads. The IXth International conference on Mesomechanics (MESO2007), Presquile de Giens, France, May 13-17, 2007.
035 Farahmand B, Saff C, Xie De, and Abdi F, Estimation of fatigue and fracture allowables for metallic materials under cyclic loading, The 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, AIAA-2007-2381. Honolulu, Hawaii. April 23-26, 2007. EI: 073210748020
034 Qian Q and Xie D, Analysis of mixed-mode dynamic crack propagation by interface element based on virtual crack closure technique, Engineering Fracture Mechanics, 74(2007): 807-814.SCI:136JY; EI: 070210358348

Science Direct-Top 25 Hottest Articles (最热门文章排行)

033 Xie D and Biggers, Jr. SB, Calculation of transient strain energy release rate under impact loading based on virtual crack closure technique. International Journal of Impact Engineering, 34(2007): 1047-1060. SCI:142EH; EI: 064910282236

Science Direct-Top 25 Hottest Articles (最热门文章排行)

032 Xie D, Salvi AG, Sun C, Waas AM, Caliskan A, Discrete cohesive zone model to study static fracture in 2D triaxially braided carbon fiber composites, Journal of Composite Materials, 40(2006): 2025-2046. SCI: 109XG; EI 064510219403
031 Xie D and Waas AM, Discrete cohesive zone model for mixed-mode fracture using finite element analysis zone model, Engineering Fracture Mechanics, 73(2006): 1783-1796. SCI: 076VA; EI: 06249934470

Science Direct-Top 25 Hottest Articles(最热门文章排行)

2

2



030 Xie D, Qian Z, Huang D, Abdi F, Crack growth strategy in composites under static loading, The 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, AIAA-2006-1842, Newport, Rhode Island, May 1-4, 2006. EI: 071610555638
029 Xie D and Waas AM, Mxed-mode fracture modeled through a discrete cohesive zone model-DCZM, in "Fracture of Nano and Engineering Materials and Structures", pp.739-740, Springer Netherlands (Proceedings of the 16th European Conference of Fracture, July 3–7, 2006, Alexandroupolis, Greece).
028 Xie D and Biggers, Jr. SB, Progressive crack growth analysis using interface element based on the virtual crack closure technique, Finite Elements in Analysis and Design, 42(2006): 977-984.SCI: 055SN; EI: 06229910070

Science Direct-Top 25 Hottest Articles (最热门文章排行)



027 Xie D and Biggers, Jr. SB, Strain energy release rate calculation for a moving delamination front of arbitrary shape based on virtual crack closure technique, Part II: Sensitivity Study on Modeling Details, Engineering Fracture Mechanics, 73(2006): 786-801. SCI:013DS; EI: 06059666974

Science Direct-Top 25 Hottest Articles (最热门文章排行)

026 Xie D and Biggers, Jr. SB, Strain energy release rate calculation for a moving delamination front of arbitrary shape based on virtual crack closure technique, Part I: Formulation and Validation, Engineering Fracture Mechanics, 73(2006): 771-785. SCI: 013DS; EI: 06059666973

Science Direct-Top 25 Hottest Articles (最热门文章排行)

025 Xie D, Chung J, Waas AM, Shahwan KW, Schroeder JA, Boeman RG, Kunc V, and Klett LB, Failure analysis of adhesively bonded structures: from coupon level data to structure level predictions and verification, International Journal of Fracture, 134(2005): 231-250. SCI:995ZA; EI: 05489503607
024 Xie D, Waas AM, Shahwan KW Schroeder JA, and Boeman RG, Fracture criteria for kinking cracks in triple material bonded joints under mixed mode loading, Engineering Fracture Mechanics, 72(2005): 2487-2504. SCI:971VA; EI 05309266179

Science Direct-Top 25 Hottest Articles (最热门文章排行)


023 Xie D, Salvi AG, Waas AM, Caliskan A, Discrete cohesive zone model to study static fracture of fiber composites, The 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, AIAA-2005-2320, Austin, Texas, April 18-21, 2005. EI: 05519593028
022 Xie D, Waas AM, Shahwan KW, Schroeder JA and Boeman RG, Computation of strain energy release rate for kinking cracks based on virtual crack closure technique, CMES: Computer Modeling in Engineering & Sciences, 6(2004): 515-524. SCI: 882BR; EI:05018773320

"
021 Xie D and Biggers, Jr. SB, Postbuckling analysis with progressive damage of tailored laminated plates and shells with a cutout, Composite Structures, 59 (2003): 199–216. SCI: 636BP; EI: 03027309177
020 Biggers Jr. SB and Xie D, Damage Progression analysis in tailored laminated plates and shells with a cutout, American Society for Composites, Proceedings of 16th Annual Technical Conference, ASC Paper 136, Virginia Tech, September 9-12, 2001.
019 李荣锋, 张锦云, 解德, 铝-钢爆炸复合板的研讨, 质料珍爱, 1999(6):31-36.
018 李立军, 解德, 东汽EQ153柴油车油底壳应变剖析取选材展望, 钢铁研讨,1998(2): 27-31.
017 李荣锋, 解德, 张锦云, 不锈钢爆炸复合板的机能及其复层构造的研讨, 武钢手艺, 1998(6):38-40.
016 Li LJ, Xie D, Wu GY, and Zhao MY, Sheet metal formability analysis and material determination, International Journal of Materials & Product Technology, 1998 (3-6): 421-426. SCI:169EL
015 赵麦英, 张家义, 谭伯聪, 解德, 李春植, 吴翔宇, 点焊试件委靡裂纹的监测和讨论, 物理测试, 1998(05):26-29.
014 Xie D, Li LJ, Wu GY, and Zhao MY, Primary investigation on press forming process by using BHF-h diagram, Proceedings of International Conference on Automobile Materials and Press Forming, Beijing, 1997:210-214.
013 张锦云, 李荣锋, 解德, 铜/钢爆炸复合板界面层的金相剖析, 钢铁研讨, 1996(3):39-41.
012 解德, 谭伯聪, 李荣锋, 李福林, 爆炸法消弭超厚板焊接剩余应力对焊接讨论力学性能的影响, 理化测试, 1996(3): 27-30.
011 李荣锋, 解德, 张锦云, 铜-钢复合板三种复合要领的对照, 武钢手艺, 1995(11):49-51.
010 解德, 谭伯聪, 李荣锋, 李福林, 振动法消弭16MnJ超薄钢板焊接剩余应力,钢铁研讨, 1995(3): 51-54.
009 解德, 谭伯聪, 李荣锋, 李福林, 李美堂, 孙永远, 爆炸法消弭超厚板焊接剩余应力的工艺研讨,钢铁研讨, 1995(2): 36-39.
008 解德, 谭伯聪, 李荣锋, 李福林, 李美堂, 孙永远, 爆炸处置惩罚消弭焊接剩余应力手艺的实行研讨及其产业运用, 湖北省暨武汉市焊接学会15周年论文集, 1995:358-364.
007 解德, 谭伯聪, 李荣锋, 李福林, 爆炸处置惩罚消弭16MnJ超薄钢板焊接剩余应力, 爆炸取打击, 1995(1): 76-81. EI: 95032615783
006 解德, 谭伯聪, 李荣锋, 李福林, 李美堂, 孙永远, 爆炸处置惩罚消弭贮氧罐焊接剩余应力, 汽锅压力容器手艺, 1994(3): 37-39.
005 谭伯聪, 解德, 李荣峰, 李福林, 三种典范焊接构造剩余应力的消弭法, 钢结构,1994,(03):153-155
004 谭伯聪, 解德, 李荣锋, 李福林, 吴佑明, 超薄钢板焊接剩余应力理会, 钢铁研讨, 1993(5): 35-38.
003 谭伯聪, 解德, 王玉涛, 陈冬青, 李书瑞, 温差拉伸法正在高炉平台大梁中的运用, 力学正在冶金行业中的运用学术讨论会论文集, 1992: 359-363.
002 Liu ZH, Wang YH, Xie D and Ding W, Dynamic fracture analysis of stiffened panel by finite difference method, Proceedings of an International Conference on Computational Mechanics, Hong Kong, 1991: 915-920. EI: 92060510319
001 刘再华, 解德, 差分法剖析加筋板静态裂纹扩大, 固体力学学报, 1991(增刊): 56-64.

获奖状况
西席风范
www.8466.com

27111.com新葡京

Copyright © 船舶取海洋工程学院办公室 建造   中国·湖北省·武汉市 珞喻路1037号   邮政编码:430074    电话:027-87543258

澳门新葡京35222